WGP-1™ Maximum Puller
Features
• For Lines 152-457 mm
• Up to 206 bar
• Flows 190-300 l/min
• Up to 40% More Thrust
With Up to 40% More Thrust
Our new WGP-1™ is designed to produce up to 40% more pulling power than our WG-1 Classic™. The rear facing jets are angled more sharply and the centralizer fins have been streamlined. We’ve also added two more centralizer fins for a total of six. The result is more pulling power to navigate longer lines and moderate inclines, plus easier retrieval of the tool.
It features 5 jet ports, with a boring jet offset at 15˚ and four jets at 155˚, plus the inlet port is available in either 1” NPT or BSPP. This tool will greatly benefit contractors with operating pressures of 172 bar or less.
WGP-1™ Specifications
Maximum Pressure | 200 bar |
Operating Pressure | 100-200 bar |
Rotation Speed | 150-300 rpm |
Flow | 190-300 l/m |
Flow Rating | 4.6 Cv |
Pulling Force | 450-623 Nm |
Inlet Port | 1 NPT or BSPP |
Tool Diameter | 107 mm |
Length | 231 mm |
Ports | 5 x 1/8 NPT |
Weight Complete | 4.9 kg |
