WGP-1™ Maximum Puller
All Advertised Pricing Subject To Change Without Notice
Specifications
• For Lines 152-457 mm
• Up to 206 bar
• Flows 190-300 l/min
• Up to 40% More Thrust
With Up to 40% More Thrust
Our new WGP-1™ is designed to produce up to 40% more pulling power than our WG-1 Classic™. The rear facing jets are angled more sharply and the centralizer fins have been streamlined. We’ve also added two more centralizer fins for a total of six. The result is more pulling power to navigate longer lines and moderate inclines, plus easier retrieval of the tool.
It features 5 jet ports, with a boring jet offset at 15˚ and four jets at 155˚, plus the inlet port is available in either 1” NPT or BSPP. This tool will greatly benefit contractors with operating pressures of 172 bar or less.
| Maximum Pressure | 200 bar |
| Operating Pressure | 100-200 bar |
| Rotation Speed | 150-300 rpm |
| Flow | 190-300 l/m |
| Flow Rating | 4.6 Cv |
| Pulling Force | 450-623 Nm |
| Inlet Port | 1 NPT or BSPP |
| Tool Diameter | 107 mm |
| Length | 231 mm |
| Ports | 5 x 1/8 NPT |
| Weight Complete | 4.9 kg |
