Warthog® WT-3/8-C™
All Advertised Pricing Subject To Change Without Notice
Specifications
• Up to 275 bar
• Flows 20-45 l/min
• Lines 76-152 mm
• Classic Workhorse Model
US Pat. No. 5,964,4Clean 76mm – 152mm Lines with Elbows
Our smaller Warthog® sewer models have all the powerful features of the larger tools, but can negotiate elbows and clean-outs commonly found in laterals from homes, buildings, restaurants and other light commercial facilities. The WT-3/8-C™ is designed specifically to handle 75mm – 150mm lines and clean-outs. This tool is most commonly used an small capacity pumps and cart jetters.
We’ve added permanent carbide buttons to the WT-3/8-C™ model, specifically designed to handle demanding applications. Pipes made of cast iron and those that have sand or silt can act as abrasive agents that can aggressively wear out the tool. Our carbide buttons are available in all offsets and add up to 5 times the life compared to previous WT-3/8™ models.
The WT-3/8-C™ features a 3/8 npt or BSPP inlet port.14
WT-3/8-C™ Specifications
| Maximum Pressure | 275 bar |
| Operating Pressure | 100-275 bar |
| Rotation Speed | 300-500 |
| Flow | 20-45 l/min |
| Flow Rating | 0.75 Cv |
| Pulling Force | 22-90 Nm |
| Inlet Port | 1/4 NPT or BSPP |
| Tool Diameter | 48 mm |
| Length | 76 mm |
| Nozzle Ports | 3 x 1/8 NPT |
| Weight Complete | .54 kg |
